Best port and polish kit for dremel
Deal Score0
Deal Score0
Best results for port and polish kit for dremel
XtremeAmazing New Intake Exhaust Engine Porting Tool Cylinder Head Snowmobile Carbide Tungsten
ZJchao 10 pieces Tungsten Carbide Rotary Burr SET 1/8" shank [Misc.]
Rocaris 40Pcs 1" (25mm) Abrasive Wheel Buffing Polishing Wheel Set For Dremel Rotary Tool
$10.88
$12.62
Last update was on: May 2, 2024 6:42 pm
- SIZE - Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel
- ABRASIVE BUFFING WHEEL SET - Each grit 10pieces, total 40pieces, Brown 120Grit,Green 180Grit,Red 320Grit,Black 400Grit
- REPAIR THE DENTS - Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing
- CONVENIENT AND PRACTICAL - Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost
HYCC 40Pcs 1" (25mm) Abrasive Wheel Buffing Polishing Wheel Set For Dremel Rotary Tool
$9.99
$12.19
Last update was on: May 2, 2024 6:42 pm
- SIZE - Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25mm Mix Grit Abrasive Buffing Polishing Wheels.
- ABRASIVE BUFFING WHEEL SET - 25 mm abrasive wheel with 3 mm silver shank and 4 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit,each grit 10pieces, total 40pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
eBoTrade 10 Pieces Tungsten Carbide Rotary Burr SET 1/8" Shank/double Cut Carbide Rotary Burr Set with 3mm Shank/tungsten Carbide Single Cut Rotary Burr SET 1/8" Shank Fit Dremel
$14.99
$17.09
Last update was on: May 2, 2024 6:42 pm
- ✔ Tungsten Carbide Double Cut Rotary Burr SET 1/8" shank Fit Dremel
- ✔ Shank diameter: 3mm, Shank Length: 35mm, Cutting edge diameter: 6 mm
- ✔ Material: Tungsten | Carbide Use: Rotary Burr, High micro hardness,high abrasion resistance,good toughness
- ✔ High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc.
- ✔ Highly recommended for polishing metals and plastics, jewelers, lapidary use, hobbies, crafts, craft modeling, home repair and so much more.
PHYHOO Wool Felt Mounted Mandrel Polishing Buffing Wheels Grinding Bits Grinder Head Polish Watch Jewelry Rotary Dremel Tool Accessories Attachment – 1/8 Inch Shank
Astro 218 1/8-Inch Pencil Type Die Grinder, 56,000rpm
$35.88
$50.59
Last update was on: May 2, 2024 6:42 pm
- Lightweight and ideal for tight spots
- Twist throttle provides variable speed control
- Designed for high speed porting and finishing of small parts
- Ideal for cleaning of dies, rotors, backing plates, brake pads, mounts plus many other applications
- Free Speed: 56,000rpm
Dremel 4486 MultiPro Keyless Chuck
$6.89
$8.68
Last update was on: May 2, 2024 6:42 pm
- Now have tool-free accessory changes
- Now have tool-free accessory changes
- Eliminate the collet and wrench when changing accessories
- Accepts all accessory rotary bits with 1/32" to 1/8" shanks
- use with rotary tool models 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8220, 8200, 8050, 800, 780, 770, 7700, 750
- Also use with Dremel attachments 212, 225, and 575
WEN 6010 6-Inch Waxer/Polisher
MATCC 5 Pcs 6 Inch Polishing Buffer Wool and Wheel Polishing Pad Woolen Polishing Waxing Pads Kits with M14 Drill Adapter
$15.98
$22.69
Last update was on: May 2, 2024 6:42 pm
- ▶ Thicker & High-Density Design: MATCC polishing buffing pads are increase the thickness to make it last loner. High-density woolen polishing pad will provide greater ability to clean up dust and polish the car. Contact seller if no Drill Adapter or more issues.
- ▶ Material: Made of good quality wool sponge pad, not easy to leave wool on the surface of the car.
- ▶ Adhesive support design from back of the disk - Use it more easily, you can change the woolen buffer pad just in seconds.