10BestProductReview 
Best results for new makita multi tool
Makita XMT03Z 18V LXT Lithium-Ion Cordless Multi-Tool, Tool Only
$99.00
$140.58
Amazon.com
Last update was on: May 17, 2024 3:54 am
- 18V LXT Lithium-Ion battery provides up to 20 minutes of continuous run time
- Variable speed control dial (6,000-20,000 OPM) enables user to match the speed to the application
- 3.2Degree oscillation angle engineered for faster, more aggressive cutting and sanding
- Large on/off slide switch with lock-on button for operator convenience
- Tool-less clamp system for fast accessory installation
Makita XDS01Z 18V LXT Lithium-Ion Cordless Cut-Out Saw, Tool Only
$185.31
$253.87
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Makita-built variable speed motor delivers 0-6,000 strokes per minute for faster and more efficient cutting
- Designed to cut openings in installed board with an adjustable blade depth up to 1-3/16" (9/16" in wood)
- Cuts up to 984 feet of 1/2" drywall on a single charge using 4.0Ah battery BL1840B (battery not included)*
- Short 1/4" stroke length with adjustable blade depth helps prevent damage to objects behind the board being cut
Makita 9557NB2 4-1/2" Angle Grinder, with AC/DC Switch (2 Pack)
$99.00
$135.63
Amazon.com
Last update was on: May 17, 2024 3:54 am
- 7.5 AMP motor delivers 10,000 RPM for high output power
- Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort
- Protective zig-zig varnish seals the armature from dust and debris for longer tool life
- Labyrinth construction seals and protects the drive gear from debris
- Slide switch is located on side of the motor housing that can be re-positioned every 90Degree
Makita DC1804 7.2-Volt to 18-Volt Pod Style and Stick Style 3-Hour Battery Charger
Makita SH02R1 12V Max CXT Lithium-Ion Cordless Circular Saw Kit, 3-3/8"
$124.58
$179.40
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Makita-built motor delivers 1,500 RPM for faster cutting
- 3-3/8" blade delivers a maximum cutting depth of 1" for a wide range of cutting applications
- Adjustable cutting depth from 1" at 90Degree and 5/8" at 45Degree
- Tilting base for bevel cuts from 0Degree - 45Degree
- Cuts plywood, MDF, pegboard, particleboard, melamine, drywall and more
Makita 197210-9 Interlocking Case, Small/4-3/8" x 15-1/2" x 11-5/8"
$30.99
$41.53
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Innovative stackable case design for efficient organization, transporting and protection of tools
- Interlocking latches secure lid shut and link multiple cases together
- Corresponding channels along lid and base of case for stable, non-shift stacking
- Low-profile, rounded carrying handle for user comfort
- Compatible with SP6000J/J1 system, Festool Sustainer cases and other similar modular storage systems
Makita B-50289 Ratchet and Bit Set (47 Piece)
$24.99
$30.49
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Convenient multi-bit set in a compact and carrying case
- Includes assortment of Phillips, Torx, slotted, hex, square bits and sockets
- Includes (11) Phillips bits with size range of (PH0 - PH3)
- Includes (8) Torx bits with size range of (T10 - T40)
- Includes (4) slotted bits with size range of (SL6-8 - SL10-12)
Makita XT268T 18V LXT Lithium-Ion Brushless Cordless 2-Pc. Combo Kit (5.0Ah)
$295.00
$404.15
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2" hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL motor delivers 1,090 in.Lbs. Of max torque
Makita 197211-7 Medium Interlocking Case, 6-1/2" x 15-1/2" x 11-5/8"
$35.51
$49.36
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Innovative stackable case design for efficient organization, transporting and protection of tools
- Interlocking latches secure lid shut and link multiple cases together
- Corresponding channels along lid and base of case for stable, non-shift stacking
- Low-profile, rounded carrying handle for user comfort
- Festool and Systainer are registered trademarks of TTS Tooltechnic systems AG & Co. KG
Makita GA4530 4-1/2-Inch Angle Grinder
$54.22
$76.45
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications
- Compact design at only 4.0 lbs. for reduced operator fatigue
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Slide switch design with lock-on for added user convenience
- Protective zig-zag varnish seals the armature from dust and debris for longer tool life
Makita 19-inch Hard Plastic LXT 18-volt 2 Tool Case Bulk Packaging
$24.97
$30.46
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Hard Plastic Design with Plastic Folding Locks and a Folding Handle
- Features Internal Divided Compartments for a Makita 18V Hammer Drill, (1) 18V Impact Driver, (1) 18V Charger and (2) 18V Batteries (NOT Included)
- Offers Extra Space Around the Tools for Smaller Accessories
- Includes: (1) Makita Hard Plastic 18-volt Tool Case (Case ONLY)
Makita 194158-6 1834 18-Volt 2.6 Amp Hour NiMH Pod Style Battery, 2 Pack
$157.99
$180.11
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Environmentally friendly
- Secure side tabs insures battery placement
- 5 contact points improves current flow even if wet or dirty
- 2.6 Ah will run longer than the competition. Makita recommends simply charging a brand new battery to a full charge before using it. The charge time for the batteries are 1.5ah = 15 mins, 2.0ah = 20 mins, 3.0ah = 30 mins, 4.0ah = 40 mins, 5.0ah = 45 mins, 6.0ah = 60 mins.
MAKITA Tool Case ONLY–XT257M / XT252M–FIT Both Drill & Impact Driver–Almost all Makita Model–XPH07Z; XDT01Z; XDT08Z; LXDT04Z; LXPH01Z; XDT04Z; And alike profile cordless tools
$23.85
$32.67
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Makita XT257M / XT252M Hard Plastic Tool Case ONLY
- Each item purchased is for (1) Hard Tool Case Only.
- This Tool Case measures roughly 19.5" x 14.5" x 5.5"
- Hold a Hammer Drill, Impact, 2 Batteries and a Charger.
- The case has a rack that can be used to store hole saw bits, bit tips, and other accessories.
Makita DS4012 Spade Handle Drill, 1/2-Inch
$154.69
$194.91
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Powerful 8.5 AMP Motor with Variable Speed for Improved Mixing and Drilling Performance
- Variable speed (0 - 600 RPM) for mixing and drilling in a wide variety of materials
- Forward and reverse lever for operator convenience
- Well-balanced design at only 6.2 lbs. for reduced operator fatigue
- D-handle rotates 360Degree with 24 detent stops for multi-position operation
Makita DC18RA Rapid Battery Charger for Li-Ion Batteries
$104.81
$141.49
Amazon.com
Last update was on: May 17, 2024 3:54 am
- N/A
- Imported
- Charging Technology: Controls current, voltage & temperature to maximize battery life
- Central Processing Unit (CPU): Analyzes data from the battery's memory chip
- Forced Air Cooling Fan: Cools the battery by forcing cool air through the battery's built-in air vents
- Fast Charging: Quickly charges an 18V 3.0 Amp hour Li-Ion battery in only 30 minutes
Makita BL1830-2 18-Volt 3.0 AH Battery, 2-Pack (Discontinued by Manufacturer) (Discontinued by Manufacturer)
$112.01
$166.89
Amazon.com
Last update was on: May 17, 2024 3:54 am
- COLD TEMPERATURE BATTERIES: These batteries can function in temperatures as low as -4 Degrees Fahrenheit (-20 Degrees Celsius)
- CHARGER AND TOOL COMMUNICATION: Onboard chips allow these batteries to communicate with their power tool counterparts to optimize performance and lifetime when on the job
- 16 CONTACT TERMINALS: When working with heavy duty impact drivers, hammer drills, or saws, the last thing you want to have happen is to lose connection with the battery during high vibration applications. The number of contact pins in this battery enable it to provide constant, consistent power throughout these uses
Makita A-96095 Metal/General Purpose 32T Carbide-Tipped Saw Blade, 5-7/8"
$29.99
$39.29
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Ultra-thin kerf design provides smoother cuts with less drag on the motor and minimal material loss
- Modified triple chip grind for increased efficiency and life
- Fully hardened steel saw plates are individually hand-hammered for flatness and expertly tensioned for true cuts
- For cutting pipe, angle iron, channel and more
- For use with Makita 5-7/8" Cordless Metal Cutting Saw
MAKITA XBU02Z 18V X2 (36V) LXT Lithium-Ion Brushless Cordless Blower, Tool Only (Renewed)
$146.45
$171.35
Amazon.com
Last update was on: May 17, 2024 3:54 am
- This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com
Makita 16 Piece – 4.5" Cut Off Wheel & Multi Grit Flap Disc Set For Grinders – Cutting & Conditioning For Metal & Stainless Steel – 4-1/2" x .045 x 7/8-Inch | Z40, Z80 & Z120
Amazon.com
Last update was on: May 17, 2024 3:54 am
- ✅ Premier Products' Exclusive Makita 16 Piece CUT & CONDITION Set | 10 Cutting Wheels + 2 Z40 + 2 Z80 + 2 Z120 Flap Discs | Engineered in Anjo, Aichi Japan for Makita 4 1/2" Angle Grinders and compatible with all 4 1/2" grinders with standard 5/8" arbor
- ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
Makita AT2550A 1-inch Wide Crown Stapler (16 Ga.)
$283.61
$422.58
Amazon.com
Last update was on: May 17, 2024 3:54 am
- Compact with less weight for all day use
- Top-loading magazine allows user to quickly load 16 GA staples varying in length from 1"" to 2""
- Quick release cam-lock opens nose assembly to clear jammed staples, minimizing downtime
- Built-in air filter minimizes dust and debris from entering tool
- Hook allows tool to remain close by but never in the way. Minimum recommended air delivery of 2.3 SCFM @ 90PSI
