Best milling machine oil pump
Deal Score0
Deal Score0
Best results for milling machine oil pump
【The Best Deal】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
$18.95
$22.74
Last update was on: May 13, 2024 9:50 am
- √ Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- √ Working Safer - Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up.
- √ Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- √ Easy To Use - Air flow and spray mist volume adjustable design, easier to use.
ChgImposs Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill
$31.96
$42.83
Last update was on: May 13, 2024 9:50 am
- Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft
- Flexible Pipe Diameter: 4mm / 0.16in
- Stainless steel flexible pipe is more resistant to high temperatures.
- Air flow and spray mist volume adjustable design, easier to use.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure)
Little Giant 500203 Lubricated Pump, Permanently Oiled Direct Drive Pump, 1-A 170 GPH
$67.59
$98.68
Last update was on: May 13, 2024 9:50 am
- SUBMERSIBLE PUMP: This Compact 170 Gph Pump features a 1/4" Mnpt Discharge, 7' shut-off head capability and screened inlet. This pump is not recommended for aquariums, swimming pools and fuel oil transfer
- IMPEDANCE PROTECTION: This pump is Impedance protected and it has maximum lift to 7-ft. Bottom inlet has snap off screen for easy cleaning. It has 1/4" MNPT outlet, with 90-Degree elbow accessory, and accepts 1/2" I.D. tubing
CUTit Multipurpose Cutting, Drilling, Tapping, Threading and Machining Oil
$30.00
$38.40
Last update was on: May 13, 2024 9:50 am
- Extremely durable synthetic additives
- Excellent anti-weld and cooling properties, protects tools and dies from premature wear
- Acts as an excellent rust and corrosion inhibitor
- For use in: Cutting, milling, drilling, threading & tapping, turning and more
- For use on both ferrous and non-ferrous metals
Metal Cutting Engraving Machine Mist Cool Coolant Lubrication Spray System for Air Pipe CNC Lathe Milling Drill for Cooling Sprayer Machine
$22.99
$31.04
Last update was on: May 13, 2024 9:50 am
- 1. Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled
- 2. Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up
- 3. The nebulizer gas and coolant is adjustable, easy to use on different processing conditions
- 4. Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
uxcell 10PCS Round Nozzle 1/4PT Flexible Oil Coolant Pipe Hose Blue Orange
Cutting Cooling Mist Coolant Lubrication Spray System Sprayer Metal Hose for Metal CNC Router Cutting Engraving Lathe Milling Machine
$49.98
$69.47
Last update was on: May 13, 2024 9:50 am
- This product has obtained the national patent, widely used in CNC lathe, general lathe, drilling machine, tapping machine, grinding machine, tool grinding machine, NC, CNC machine, punching machine, sawing machine, milling machine
- Cooling the processing solution can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- Gas processing debris was blown away, processing more secure.
Little Giant 523003 P-AAA Manual Submersible Recirculating Water Pump with 4.6 ft. maximum lift, Sump Pump for statuary fountains, water displays, air conditioners, machine tool coolants, 115 Volt 120 GPH
ChgImposs Mist Coolant Mist Lubrication System Unit, Metal Cutting Engraving Cooling Sprayer Machine with Air Pipe for CNC Lathe Milling Drill Machine
$9.96
$12.15
Last update was on: May 13, 2024 9:50 am
- Whole Length: 350mm / 13.78in
- Cardan Joint Diameter: 5mm / 0.2in
- Extend the live of the machine, update the precision of processing. Decrease the fee of the operation and effect of process.
- Can save the cooling liquid in the range of 80%, good cooling effect. Can decrease the liquid waste which influence the circumstance.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
Little Giant PE-1 Small Submersible Pump, 1/125HP 170GPH 115V Epoxy Encapsulated
$41.23
$60.20
Last update was on: May 13, 2024 9:50 am
- WATER PUMP: This compact 170-GPH pump features 1/4" MNPT discharge, 7' shut-off head capability, screened inlet, and 6' power cord. Pumps are not recommended for fuel oil transfer, aquariums, and swimming pools
- IMPEDANCE PROTECTION: This pump is Impedance protected and it has maximum lift to 7-ft. Bottom inlet has snap off screen for easy cleaning. It has 1/4" MNPT outlet, with 90-Degree elbow accessory, and accepts 1/2" I.D. tubing
Amarine-made Y-8 Lubricating Manual Oil Pump Hand Lubrication 0.5L CNC 6mm Double outlet port
Last update was on: May 13, 2024 9:50 am
- Products are widely used in CNC machinery, milling machine, lathe machining center, production line and machine tools, forging textile, plastics, rubber, mining, metallurgy, construction, printing, chemical, pharmaceutical, casting, food and other industries machinery and equipment Lubrication system.
- How it works: When pulling the handle by hand, push the plunger to drain the oil that will be stored in the cylinder. When the handle is released, the plunger sucks oil under the action of spring force.