10BestProductReview 
Best results for metal grinding drill bits
Vermont American 16710 3/4-Inch by 1-1/4-Inch Useable Length Cylinder Metal Grinding Point
1/8" Shank Diamond coated Cylindrical Grinding Mounted Point Bits Burrs Fits Dremel Type Rotary Tool , 4 mm head , 10 pcs
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling
$12.23
$13.45
Amazon.com
Last update was on: May 10, 2024 7:56 am
- LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
- CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
- HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
40PCS Rotary Grinding Bit Set, 10PCS Diamond Cutting Wheel (22mm) + 20pcs Diamond Grinding Burr Drill Bits Sets + 10PCS Abrasive Mounted Stone Grinding Wheels Bits (3mm Mandrel)
$11.99
$13.67
Amazon.com
Last update was on: May 10, 2024 7:56 am
- Package Included : 20pcs Diamond Grinding Burr Drill Bits Sets, 10PCS Abrasive Mounted Stone Grinding Wheels Bits Sets, 10PCS Diamond Cutting Wheel (22mm) with 2PCS 3mm Mandrel
- Diamond cutting disc Size: 22mm. Evenly coated with diamond particles, Suitable for cutting gems, glass, ceramics, tiles, rocks, aluminum and copper
- Diamond rotary burr set 6 size:6mm head, 3mm handle, length 45mm. Evenly coated with diamond particles, Different grinding heads for grinding, engraving, cutting, polishing, engraving and etching, for hard materials such as stone, glass, metal, hardwood, ceramic tile, ceramic, marble, granite.
Carbide Burr Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs
$17.99
$20.69
Amazon.com
Last update was on: May 10, 2024 7:56 am
- Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs.
- With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal.
- For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials.
- Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder.
Ginode 6mm Rotary File Burr Cutter, 6Pcs Tungsten Steel Rotary File Cutter, 1/4" Shank Engraving Grinding Drill Bit, For Metal Plastic Wood Grinding
$9.99
$14.29
Amazon.com
Last update was on: May 10, 2024 7:56 am
- ▲1/4" (6mm) SHANK - 1/4'' shank fits all drills.
- ▲TUNGSTEN STEEL MATERIAL - Precision cutting edges will not clog or load up, machining hardness reach ≥ HRA85.
- ▲CROSSOVER LINE DESIGN - not easy to block the lines, more suitable for the object of relatively low density material.
- ▲WIDE APPLICATION - Used for fine carving resin, plastic, ceramic, soft metal and stone, fine polishing woode and bone, etc.
YUFUTOL SA-5 Tungsten Carbide Burr Cylinder Shape Double Cut Rotary Burr File(1/2” cutter Dia X 1”Cutter Length) with 1/4” Shank dia,Pack of 1
$13.69
$19.71
Amazon.com
Last update was on: May 10, 2024 7:56 am
- 【Shape】 Double Cut cylinder shape SA-5, Size: 45mmShank length, 1/4”shank diameter, 1/2" cutter diameter, 1" length ofcut
- 【Durable】 Made of heat-treated tungsten carbide YG8that lasts 10 times working life than HSS , suitable for machining variouskinds of metal material including ≤HRC65 hardened steel.
- 【Versatile】 Widely used for metalwork, tool making, engineering,model engineering, wood carving, jewellery making, welding, chamferring,casting, deburring, grinding, cylinder head porting and sculpting.
XCSOURCE 1 Set 6X8MM Head Tungsten Carbide Burrs For Rotary Drill Die Grinder Carving Bit BI044
YXGOOD 10 Pieces Tungsten Carbide Double Cut Rotary Burr Set with 3 mm (1/8 Inch) Shank and 6 mm (1/4 Inch) Head Size
SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
$7.95
$10.10
Amazon.com
Last update was on: May 10, 2024 7:56 am
- Titanium-coated diamond burrs
- Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
- All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
- A versatile set for numerous projects with grits 120-150
- Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
Big Horn 19391 5PC Diamond Burr Set – 1/4" Shank, 50 Grit – Coarse
$11.58
$15.86
Amazon.com
Last update was on: May 10, 2024 7:56 am
- 5 Assorted shapes
- Remove burrs on glass, metal, stone, porcelain, marble, granite, wood, ceramics, fiberglass and plastic
- Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing
- Diamonds are nickel-bonded to the surface
- Each has a 1/4" shank for use with rotary tools, drills, and grinders
Carbide Burr Set, Acrux7 5pcs Double Cut Rotary Burr Set with 6 mm(1/4 Inch) Shank and 8mm Cutting Edge, Die Grinder Bits for DIY Woodworking, Metal Carving, Engraving, Drilling, Polishing
$17.99
$24.83
Amazon.com
Last update was on: May 10, 2024 7:56 am
- Material: Tungsten Carbide. These rotary burrs has high micro hardness, high abrasion resistance and good toughness.
- Size: Shank diameter: 6 mm(1/4 inch), Cutting edge diameter: 8 mm(3/10 inch), Total length: 58-65mm.Please check the size before you buy it.
- Suitable for all kinds of metal(including all sorts of hardened steel) and non-metal (such as marble, jade, bone).
- Suitable for metalwork, tool making, model engineering, wood carving, jewelry, making,welding, chamfering, casting, deburring, grinding,ect
DLtools 10pcs Double Cut Tungsten Carbide Rotary Burr Set, Metal Carving Drilling Polishing Bits with 1/8"(3.175mm) Shank and 1/4"(6.35mm) Head Dia for Die Grinder
$16.89
$19.25
Amazon.com
Last update was on: May 10, 2024 7:56 am
- MORE DURABLE➤Made of Tungsten Carbide,Can maching various kind of metal material including
- DETAILED SIZE➤All the carbide burr with 1/8”(3.175mm) shank dia and 1/4”（6.35mm） Head dia,Which includes the most popular used shapes ,there always a type meet your needs
- POPULAR CUT STYLE➤Double(or diamond) cut burr tend to be used on ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials,such as plastics and wood
Double Cut Titanium Carbide Rotary Burr Set – Rocaris 10 Pieces 1/8"(3mm) Shank and 1/4"(6 mm) Head SizeTungsten Steel, for Woodworking, Drilling, Metal Craving, Engraving, Polishing
$17.99
$21.41
Amazon.com
Last update was on: May 10, 2024 7:56 am
- 【Carbide Die Grinder Bits】Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).carbide rotary burr set with 1 4-inch shank.
- 【Double Cut Design】The groove lines of the head are crossed, more suitable for an object whose density is relatively low, such as wooden, plastic and aluminum.
- 【Long Service Life】The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
Carbide Burr Set JESTUOUS 1/4 Inch Shank Diameter Double Cut Edge Rotary File Polishing Carving tool for Die Grinder Drill Bits,8pcs
$39.99
$45.59
Amazon.com
Last update was on: May 10, 2024 7:56 am
- The carbide burr set tool fits most small rotary tools,die grinders,for woodworking drilling carving engraving milling porting.
- Made of heat-treated tungsten carbide material,sintered and machined from 100% new raw tungsten carbide.
- Unique tooth angle prevents chipping for the longest lasting design possible.
- Used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials.
YUFUTOL Carbide Burr Set with 1/4”(6.35mm) Shank 8pcs Double Cut Solid Carbide Rotary Burr Set for Die Grinder Drill, Metal Wood Carving, Engraving,Polishing,Drilling
Amazon.com
Last update was on: May 10, 2024 7:56 am
- 【Quantity】8pcs Carbide Rotary Burr Set, 1/4 inch shank , fits most Rotary Die grinders
- 【Durable】Made of heat-treated tungsten carbide that hardness can reach to HRC70, sharp and sturdy
- 【Versatile】Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting
- 【Target】Suitable for all skill levels: this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable
