10BestProductReview 
Best results for double sided drill bits
DEWALT DW2024B6 No. 2 Phillips/No. 8 Slotted Double Ended Bit, 6-Pack
1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$15.05
$21.22
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
Double Ended Drill Bit Set – Eagles Pack of 10 HSS M35 1/8" Cobalt Twist Drill Bits
$10.99
$14.18
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- 1. Made of M35 high-speed steel for an optimal blend of strength, heat resistance and wear resistance
- 2. 1/8" diameter with 1/2" twist length and 1-53/64" overall length
- 3. 135° split point helps ensure true starts and eliminates bit walking
- 4. Great for general use in metal, wood and plastic
- 5. Ideal for use in stationary drills
Pack of 12, 1/8-Inch Titanium Nitride Coated Drill Bit, High Speed Steel, Jobber Length, for Metal, Plastic, Wood
$13.15
$18.41
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM PREMIUM HIGH-SPEED STEEL: peform better because of its well-balanced toughness
- TITANIUM NITRIDE COATING: add lubricity and hardness, enhancing chip flow, finish hole quality and drill life
- APPLICATION: offer best durability and speed for repetitive drilling in medium and softer materials, soft metal, PVC and wood
Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel
$11.99
$13.67
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- HSS-CO MATERIAL - Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- 135° SPLIT POINT - the 135° quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from "walking and wanding". Easy cutting without need of center punch.
IRWIN Tools 63108 1/8-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 12
$12.61
$14.25
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- M-35 Cobalt Construction for Durability in abrasive materials
- Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking
- Straight shank works in both keyed and key-less drill chucks
- Heavy duty spiral flute design produces faster chip ejection
- Shorter cutting lips reduce torque for drilling in high tensile strength materials
Werkzeug Self Centering Hinge Tapper Core Drill Bit Set for Woodworking, Adjustable Door Window Drill Bits with 1 Hex Key & 8 Replacement Drill Bits (5/64 – 1/4 Inches), 16 Pieces
$18.99
$23.36
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- Center Drill Bit: Werkzueg center drill is made of high speed steel drill bit and quenching treatment shell designed. High hardness, durable and superior drilling performance
- Satisfy all you demand: Hinge drills come in 8 different sizes: 5/64', 7/64'', 2 of 9/64'', 11/64'', 13/64'', 5mm and 1/4". With 1 hex key and 8 replacement drill bits
- Excellent Design: Automatic positioning center enhance accuracy and efficiency. Double-sided hole design fast and automatic discharge sawdust from the hole on both sides
1/8" M35 Cobalt HSS Jobber Length Twist Drill Bit with Straight Shank,Heavy Duty, Pack of 10 PCS, Drilling for Cast Iron, Heat-treated Steel, Stainless Steel and Other Hard Materials
$10.99
$12.75
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- Product Information: 10 drill bits: Each kit contains a total of ten drill bits in the same size
- Accurate and Neat: 135°Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
- Excellent Performance: Bits are extremely heat resistant. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks
Bosch CO2135 1/8 In. x 2-3/4 In. Cobalt Drill Bit
$1.65
$1.82
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Acrux7 Screwdriver & Drill Bit Extension Flexible Shaft, 11.8 inch (30cm) / 3 pack, Flexible Gooseneck Double Sided Drill Adapter Holder for Hand & Power Electric Driver
$9.90
$12.08
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- ★Material -- This flexible shaft is made of high quality carbon steel and plastic which make it practical and durable.
- ★Widely used -- It makes the screwdriver head reach the screw which is in the narrow corner, a perfect common tool for computer chassis, electrical cabinets, furniture, electrical appliances and any narrow space dead angle and other screwdriver.
- ★Widely compatible -- This extension shaft is compatible with Small wrench, cordless screwdriver, low speed DC hand drill, pneumatic screwdriver, torque drill, electric screwdriver.
DRILLFORCE 1/8 inch, HSS Twist Drill Bits,5% Cobalt Jobber Length Twist Drill Bits,10pcs in Plastic Bag, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. (1/8)
$8.99
$12.86
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- Cobalt drill bits: Classic 5% Cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Hardness: 5% Cobalt drill bits’ Rock wall Hardness Level HRC 65-66.
- Package & Size: 10 Pieces drill bits in a plastic bag, Diameter 1/8 inch, Total length 2-3/4 inch, Working length 1-5/8 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Stainless Steel, Not For Use On Concrete / Masonry. Perfect match for workshop or service vehicles.
DocaDisc Decal Removal Eraser Wheel Tool Kit – 4 inch Rubber Power Drill Attachment For Removing Pinstripes, Stickers, Adhesive Vinyl Decals from Cars, Rvs, Boats and More
$14.99
$21.89
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- FAST AND EFFECTIVE: Innovative wheel design keeps wheel cool and works with applying only light pressure. The rubber stripe off wheel can withstand up to 4000 RPM to effectively and quickly remove decals, stickers, and pinstripes. Most effective RPM falls between 1500-3000 RPM.
- VARIETY OF USES: Effective removal of auto body vinyl decals, pinstripes or pinstriping, bumper stickers and other adhesives from cars, boats, RVs, trucks, trailers, buses, bikes, motorcycles, appliances and more. Great to use on multiple paint, chrome, and metal surfaces.
KCC Industries Spot Weld Cutter Set (2 Pack) + 2 Replacement Blades
$18.97
$27.13
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- DURABLE - Double-Sided 3/8" Heavy Duty High Speed Rotary Metal Cutting Blade Made From High-Quality Heat Resistant Steel. Our Center Pins are Made of a Higher-Quality, Thicker Steel than the Competition - Cutters with the Black Center Pin are Made of a Cheaper Metal and Snap Easily
- FAST - Quickly Separates Spot-Welded Panels Without Distortion
- PERFECT SIZE - 3/8" Diameter Cutting Blade is Ideal for Removing Spot Welds
Tenghebao Self-Centering Hinge Tapper Core Drill Bit Set (16PCS) with Automatic Center Punch(1PC) for Woodworking Adjustable Door Window, Spring Loaded Metal Drill Bits (17)
$20.89
$30.92
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- SUPERIOR DRILLING PERFORMANCE：Center drill is made of high speed steel drill bit and quenching treatment shell designed. High hardness, durable and superior drilling performance.
- HIGH-QUALITY MATERIALS: Center Drill uses of high-quality HSS high-speed steel. Center Hole Punch uses of High Hardness Brass .Not only higher damage resistance, but also not easilier broken.Which can withstands high impact force and resists corrosion.The service life is four to five times than of a common center drill.
Zinger Spot Weld Cutter, 2 Pack of 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool+ 4 Double Sided Replacement Blades
$17.99
$25.01
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- The spot weld cutter set includes:2 pcs x 3/8 inch rotary spot weld drill+4 replacement metal cutter blades
- Fit for: The 3/8" cutting spot welds remover fits most 1/4" drills, arbor with flats to eliminate spinning in chuck
- Material: high-quality heat resistant steel to make sure high strength and durable.Quickly separates spot-welded panels without distortion.
- Wide range use:iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc.
1/8" Double-ended High Speed Steel Stubby Drill Bits (12 Bits)
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- Double-ended 1/8" high speed steel drill bits with durable Chromium finish
- Made from high speed steel, perfect for drilling sheet metal!
- Double-ended, twice the amount of drilling from one bit!
- 12 drill bits come in 1 tube for convenient storage
- 1/8" Diameter
- 2-1/4" Length
10pc 1/8" Double Ended Cobalt M35 Drill Bit Set
HSS M2 Metal Jobber Twist Drill Bits, Pack of 10 (1/8", 3.2mm)
$11.79
$13.56
Amazon.com
Last update was on: May 17, 2024 2:26 pm
- It is typical steel grade of W-Mo common High Speed Steel. With high red hardness and toughness, which is economical and affordable
- The head of drill bit has special sharpening edge and high hardness.
- Excellent machining performance for drilling workpieces.
- Increase productivity and reduce the processing cost of unit holes.
- Smooth and Sharp slot.
