10BestProductReview Finding your suitable readers for dewalt scroll saw 788 tension clamps is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for dewalt scroll saw 788 tension clamps including detail information and customer reviews. Let’s find out which is your favorite one.
639 reviews analysed
DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw – Yellow
- Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
- Exclusive tool-free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 in
- On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
- Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
- Arm lifts so blade can be easily threaded through the material for inside cuts
Product Description
Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches long
Amazon.com
The dependable DEWALT 20-Inch Variable-Speed Scroll Saw is designed to help you create accurate, detailed workpieces with ease. Its user-friendly configuration with easy-to-access controls, reduced-vibration design, and variable-speed performance allow for incredible precision. For added convenience and durability, an integrated cast-iron table provides material support, and a flexible dust blower helps keep your work area pristine.
Unique Arm Design for Accurate Cuts
A scroll saw needs to perform both reliably and accurately, whether you’re crafting custom jigsaw puzzles or designing unique trim pieces. This DEWALT scroll saw’s double parallel-link arm design helps it deliver on both fronts by reducing vibration. The specially designed arm pivots from the back of the saw to the front, shortening the distance that the arm needs to move and allowing for smoother, quieter saw operation. With less vibration, you can produce accurate cuts with ease.
This unique arm design also works to keep the saw’s blade perpendicular to whatever you’re working on, reducing the chance of over cutting or under cutting.
Easy to Handle with Variable-Speed Control
Adding to the saw’s intuitive, design are convenient controls engineered by DEWALT to keep your workflow smooth. The saw’s on-off switch, speed control, and blade-tensioning lever are all located within easy reach on the front, upper arm. The saw’s flexible dust blower is also located on this portion of the arm so it can easily be directed where you need it, keeping your work surface clear of unwanted debris.
The scroll saw’s electronic variable-speed control allows you to make quick, accurate adjustments and utilize speeds ranging from 400 to 1,750 strokes per minute. The saw relies on a dependable 1.3 Amp motor for the power you need and delivers a variable stroke length between 3/4 inch and up to 2 inches deep. This application-specific performance translates to improved control and cleaner results.
Save Time with Tool-Free Blade Changes and Adjustable Table
Whether you’re working with a variety of specialty materials or you’re simply ready for a more aggressive cut, the DEWALT exclusive, tool-free blade clamps allow you to complete blade changes in just seconds. And the arm is easy to lift, making it easy to thread the blade through materials when making inside cuts.
Weighing 56 pounds, this scroll saw has a heavy-duty feel yet is small enough to move around the shop easily. The saw’s oversized, cast-iron table provides excellent support no matter what you’re working on, and the table bevels 45 degrees to the left and 45 degrees to the right for added versatility.
This 20-inch variable-speed scroll saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What’s in the Box
DEWALT 20-Inch Variable-Speed Scroll Saw, hex wrench, and blades.
Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw
- Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
- Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
- Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
- Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° – 45° left and right. Motor: 1.3 Amp
After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.
Motor: 1.3 Amp
Speeds: 400-1,750 SPM
Capacity: 20 in.
Stroke Length: 3/4 in.
Table Size: 16 in. x 24 in.
Table Tilt: 0°-45°, Left and Right
Cutting Capacities: at 90°: 2 1/8 in. at 45°: 1 5/8 in.
Assembled Depth: 39 in.
Assembled Width: 16 in.
BUCKTOOL 16-inch Variable Speed Scroll Saw Pin or Pinless Blade with Pedal Switch Cast Iron Work Table
- Variable Speed: 1.2-Amp DC Motor for Quiet, Smooth Performance
- LED Worklight: Vibration-free LED light with no light bounce provides a clear view when cutting
- Pedal Switch Design: With a hands-free convenience pedal switch for easily stop and start the tool with the tap of your foot when you need to drill a new hole, change blade, or if an emergency occurs
- Quick-Change Blade System: Quick-Change Blade System with Quick open side panel and user-friendly blade holder, easy for blade changing, attached with 3 blades 2 with pin and 1 pinless
- Cast Iron Table: Heavy-duty 16-by-9-inch cast iron work table bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth
Excalibur -EX-2121" Tilting Head Scroll Saw with Foot switch
- UNIQUE TILTING HEAD – Tilt the head 38° left or 45° right to keep the workpiece level, allowing for better control and more precise cuts.
- ACCIDENT PREVENTION – Upper and lower blade guard assembly helps prevent accidental hand contact with the blade. While, the switch protection device prevents unintentional start-up.
- ADJUSTABLE BLADE MOUNTING – Easily raise or lower the mounting position of the blade to make just the right cut.
- SEAMLESS BLADE CHANGES – Finger-operated blade clamps make changing the blades quick & easy. No tool required.
- LARGE TABLE SURFACE – The spacious work surface allows you to cut any material you need!
The Excalibur 21″ variable speed scroll saw’s unique design provides a stable platform when cutting straight or on an angle. Unlike other scroll saws where the Table is Tilted for angles cuts, the entire head of the Excalibur tilts 45 DEG to the left or the right. This allows the user to better control the work piece on a Flat Table surface, for more safe and accurate cut, and the covenient foot switch. Solidly built upper and lower parallel arms keep the blade straight with minimal blade deflection allowing for precise cuts. ETL Certified and 2 year limited warranty. Includes: foot pedal/switch
CHERVON NA/SKIL 3335-07 16", Scroll Saw With Light
- Integrated dust removal system keeps cutline free of debris
- Articulating LED worklight ensures that the work piece is clearly lit.1.5 inches Dust port keeps work area clear of dust
- Electronic variable speed control helps cut a variety of materials
- Tilting 16″ x 10″ work table tilts 0-45 degrees for precise cuts
- 16″ throat allows for cutting thicker pieces
16” Scroll Saw with Light is manufactured with an electronic variable speed control to easily cut a variety of materials plus a 16” throat for cutting thicker pieces and a tilting 16”x10” work table tilting 0-45 degrees for precise cutting results. Features an integrated dust removal system for a cutline free of debris, a 1-1/2” dust port allowing work area to stay clear of dust and an articulating LED work light ensuring work piece is clearly lit. Includes convenient on tool blade storage keeping blades handy when needed and a keyless blade change for hassle-free blade changes. Product is sold with (2) blades.
Excalibur EX-16 16" Tilting Head Scroll Saw
- Upper and lower blade guard assembly helps prevent accidental hand contact with the blade, switch protection device prevents unintentional start-up
- Unique head tilting 30° left and 45° right (not table tilting) keeps the workpiece level for better control and more accurate cuts — 2” max cutting depth
- Variable speed of 400-1400 strokes per minute — easy access speed and tension Controls with constant torque permanent magnet motor
- Onboard dust blower for direction dust extraction hook-up
- Large 12″ x 18.5″ table surface, quick blade changes with finger, operated blade Clamps, no tools required
Papa’s Workshop The Scroll Saw Lifter – for the Dewalt 788 and Delta 40-690 Scroll Saws
- NOTE: SCROLL SAW NOT INCLUDED with the LIFTER.
- Easy to install and to use – one hand operation – makes your scrolling easier and more fun.
- Made with quality components – Anodized Aluminum…Stainless Steel…Steel
- Designed to last the life of your Dewalt or Delta Scroll Saw
- Note: All Lifters ship via USPS Priority Mail and arrive in US locations in about 3-5 days.
Note: Scroll Saw NOT included. The LIFTER is an accessory for the Dewalt 788 and Delta 40-690 scroll saws. It holds the saw arm in the UP position while you change blades and/or re-position your work piece. When you raise the saw arm The LIFTER latches automatically. Then to lower the saw arm, just lift on the arm and pull back the latch with your index finger. It’s quick and easy. —– To see a video on how to install The LIFTER, please go to: https://www.youtube.com/watch?v=leP5krqqKto NOTE: ALL LIFTERS ARE SHIPPED VIA USPS Priority Mail. They usually take about 3-5 days anywhere in the US.
SCROLLNADO Dust collection for the scroll saw (Dewalt DW 788, Delta 40-690, Delta 40-694, Delta 40-695)
- Innovative dust collection accesory for the scroll saw
- Picks up nearly all of the dust while scroll sawing
- Works with Dewalt DW 788, Delta 40-690, Delta 40-694, Delta 40-695
- Collects dust above and below your workpiece and scroll saw table
- Installs easily in minutes. Top tube attaches magnetically and is easily adjusted.
We are excited to introduce a new (patent pending) dust collection accessory for the scroll saws. SCROLLNADO works with some of the most popular scroll saws (Dewalt DW 788, Delta 40-690, 40-694, and 40-695). We hope apply our patent pending dust collection accessory to other scroll saws in the near future. Our innovative accessory collects wood dust right its source, very near the scroll saw blade. In addition, SCROLLNADO collects dust below and above your wood workpiece collecting almost all of the dust that is created. This accessory easily installs in minutes with no modification to your scroll saw. We use thin walled tubes to put the vacuum near the source, right at your blade (above and below your workpiece). Because we use a thin walled tube, there is no risk of harming your scroll saw if the scroll saw arms strikes the dust collection tube. The result is placing the dust collection right at the source collecting nearly all of the dust created. Below your workpiece (and scroll saw table), the scroll saw blade actually passes through holes in the dust collection tube. The tube actually surrounds the blade under the table (hard to get much closer). Any dust that would have fallen below the table get sucked into our dust collection tube before it can get very far. Above your wood workpiece, the dust collection tube is held in place magnetically on the upper scroll saw arm. Although the dust collection tube is thin walled, it is rigid enough to position the vacuum tube very close to the scroll saw blade positioning it from a distance. The top dust collection tube is positioned behind the scroll saw blade and above your workpiece. As a result, it is completely our of your way and does not block your view. SCROLLNADO’s dust collection tube has a 1” outside diameter. It fits into the inside diameter of many popular 1 1/4” dust collection hose fittings. In addition, many dust collection reducer fittings have a 1 1/4” diameter.
PORTER-CABLE 18" Variable Speed Scroll Saw with Stand
- Large aluminum 20″ x 12 5/8″ dual tilting table allows for bevel cutting up to 45 degrees
- Patented table top bevel scale for accurate and convenient readings
- Tool-less blade holder makes quick and easy 5″ pin or plain end blade changes
- Built-in adjustable LED work lamp for better illumination of work area
- Variable speeds between 500 and 1500 SFM with upfront control knob
The PCB375SS features a broad 12-5/8″ x 20″ aluminum dual tilting table, enabling 45 degrees left and 15 degrees right bevel cuts for a range of accurate cut angles visible on a scale conveniently and securely situated in the tabletop. An upfront tool-less blade holder and a cam action blade tension adjustment allow woodworkers to quickly and easily change and regulate pin or plain blades. It also includes an upfront on/off switch that simplifies speed control changes between 500-1,500 SPM, a die cast aluminum frame, and a large cast iron base that reduces vibration in cutting heights ranging from 2-1/4″ (45 degrees right) and 1-1/4″ (45 degrees left) to 2-1/4″ (maximum cutting height). The saw includes blade storage and a study steel stand.
ShopSeries RK7315 16" Scroll Saw with Variable Speed Control
- Powerful, lightweight 1.2-amp scroll saw ideal for a variety of woodworking projects
- Die-cast aluminum table bevels from 0 to 45 degrees
- Includes two durable 5″ tungsten carbide blades with a throat depth of 16″ and a cutting depth of 2-1/2″
- Variable speed control and a 4/5″ stroke ensure clean accurate cuts
- 2 year limited warranty protects against defects in materials and workmanship
Product Description
The ShopSeries 16″ Scroll Saw is equipped with a 1.2-amp motor, making it ideal for powering through a variety of woodworking jobs such as making intricate cuts, curves, and joints. Variable speed control and a 3/4″ stroke ensure clean accurate cuts, while the die-cast aluminum table bevels from 0 to 45 degrees to ensure precision and accuracy. This scroll saw includes two durable 5″ tungsten carbide blades with a throat depth of 16″ providing a cutting capacity of 2″ at 90 degrees and 1-3/16″ at 45 degrees, and the on-board storage prevents blades from getting lost or damaged. It is also equipped with a built-in blower to keep dust from blocking the view of the work and a dust collection port to keep the work area clean, while the included blade guard provides enhanced operator safety. The ShopSeries 16″ Scroll Saw comes with a 2 year limited warranty that protects against defects in materials and workmanship. Built for performance and value, ShopSeries brings superior engineering and design to a line of power tools designed to last. Reliability, ease of use, precision and innovative features are all here to aid the user in completing their projects with speed and quality. From DIY-ers to homeowners, ShopSeries tools will get the job done right.
From the Manufacturer
Shop Series present another great value for your home workshop – the 16 inch scroll saw. Variable speed and a 4/5″ stroke ensure clean accurate cuts while the 0 to 45 degree bevelling table lets you make more specialized cuts, It is also equipped with a dust port and dust blower to keep the work area clean and safe. Power is provided by a 1.2 amp motor with no load speed of 500 – 1700 spm’s. Throat depth is 16 inches and the cutting depth is 2-1/2 inches. It comes with a blade guard, blade holder, allen key and two blades (1 x 15 TPI and 1 x 18TPI).
Conclusion
By our suggestions above, we hope that you can found Dewalt Scroll Saw 788 Tension Clamps for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Dewalt Scroll Saw 788 Tension Clamps, eg:
- What are Top 10 Dewalt Scroll Saw 788 Tension Clamps for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Dewalt Scroll Saw 788 Tension Clamps to buy?
- What are Top Rated Dewalt Scroll Saw 788 Tension Clamps to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt Scroll Saw 788 Tension Clamps?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt Scroll Saw 788 Tension Clamps.
- Before deciding to buy any Dewalt Scroll Saw 788 Tension Clamps, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Dewalt Scroll Saw 788 Tension Clamps and What you should consider when buying the Dewalt Scroll Saw 788 Tension Clamps and Where to Buy or Purchase the Dewalt Scroll Saw 788 Tension Clamps. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Dewalt Scroll Saw 788 Tension Clamps of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt Scroll Saw 788 Tension Clamps.
