10BestProductReview 
Best results for craftsman table saw fence upgrade
Shop Fox W1410 Fence with Standard Rails
Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right
Shop Fox W2005 Classic Fence with Standard Rails
JET 708675PK XACTASAW Deluxe 3-Horsepower, 1Ph, 50-Inch Rip Fence
$2,699.91
$3,509.88
Amazon.com
Last update was on: July 6, 2024 3:31 am
- Quick release riving knife greatly reduces binding or kickback risk
- Push button arbor lock for rapid blade change
- Poly-V drive belt system delivers efficient, quiet operation
- Left tilt, Wide stance heavy-duty trunnion for stability and smooth blade positioning
- Enclosed cabinet with built-in sealed storage drawer
Kreg KMS7102 Table Saw Precision Miter Gauge System
Amazon.com
Last update was on: July 6, 2024 3:31 am
- Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
- Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
- Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
INCRA Miter1000/HD Miter Gauge
$124.95
$142.44
Amazon.com
Last update was on: July 6, 2024 3:31 am
- 180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at ±22-1/2-Degree
- Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit
- Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control
- 1/10th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length
- Removable Retaining Clip for T-Slot Miter Channels
ZEROPLAY Miter Bars by MICROJIG (Double Pack)
$33.64
$48.44
Amazon.com
Last update was on: July 6, 2024 3:31 am
- Hassle-free miter bars using One-Touch Calibration
- No slop, side-to-side play or seasonal warping
- Top-down installation for easy and fast mounting to jigs, fixtures and sleds
- Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks
- Includes 2 ZEROPLAY miter bars, 2 ZEROPLAY miter stops and cross cut jig plans
- For T-Track Miter Slots Only
Delta Power Equipment Corporation 847962005250 Fence System
$211.97
$271.32
Amazon.com
Last update was on: July 6, 2024 3:31 am
- One piece square tubular rail
- Mounting design attaches to Delta table saws including Contractor Saw, Hybrid Saw, and Unisaw models
- Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0.4mm)
- Easy-gliding, steel tube fence body to handle quick, precision ripping, and square cuts
- Fence securely clamps to front tube and hooks over rear rail to allow for fence attachments
Shop Fox D3575 Resaw Fence Complete Kit
Craftsman 21833 Table Saw Zero-Clearance Insert CR-4
$33.03
$38.98
Amazon.com
Last update was on: July 6, 2024 3:31 am
- LEECRAFT Model Number CR-4
- Fits Craftsman 21833, Grizzly G0715P, Dayton 4KXD1, Masterforce 240-0036 table saws
- 15-1/8" x 4" x 1/8" thick with pre-milled blade, dado and riving knife slot
- Precision machined from melamine faced high density phenolic laminate
- Installation instructions included
Grizzly G2535 Single-Phase Motor with 3450 RPM
$250.95
$326.24
Amazon.com
Last update was on: July 6, 2024 3:31 am
- All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market.
- Size: 1-1/2 hip
- Type: Enclosed
- Made to demanding specifications these motors feature the same quality as the motors we install in our heavy-duty machines.
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
$30.34
$36.10
Amazon.com
Last update was on: July 6, 2024 3:31 am
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar Equipped with Adjustable Spring Loaded Plungers and Removable Retaining Disc
$49.99
$68.99
Amazon.com
Last update was on: July 6, 2024 3:31 am
- If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
MJ SPLITTER SteelPro TK
$39.00
$52.65
Amazon.com
Last update was on: July 6, 2024 3:31 am
- America's most popular aftermarket table saw splitter for preventing kickback (for thin kerf saw blades only)
- Installs directly to wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Automatic Kerf Keeper prevents reactive wood from binding on the saw blade
- Simple instructions and installation drill guide included
Taytools 300015 Deluxe 32 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port
$99.99
$136.99
Amazon.com
Last update was on: July 6, 2024 3:31 am
- Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
- The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
- Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension
$329.99
$442.19
Amazon.com
Last update was on: July 6, 2024 3:31 am
- Fits all contractor-grade table saws and all right-tilt cabinet-grade table saws that have 27-Inch deep by 1-1/2-Inch thick cast iron tables.
- Included ProFence quickly dismounts and hangs on provided j-hooks while you use your tablesaw.
- Perfect for small shops.
- Includes router top, fence, and mounting hardware. ProPlate is sold separately. Plate opening 8-1/4 by 11-3/4. The ProLift 40-150 has a 3/8” thick plate.
