Best craftsman 10 table saw reviews
Deal Score0
Deal Score0
Best results for craftsman 10 table saw reviews
Rikon 10-305 Bandsaw With Fence, 10-Inch
$339.99
$414.79
Last update was on: April 27, 2024 3:37 am
- Solid Steel Design- The 10-305 is a scaled down version of the popular 10-345 and 10-325. Frame is made of steel plate, stronger than plastic frames used by other manufactures
- Cast Iron Table-Large 13-3/4-Inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size
- Rip Fence- A quality rip fence is now included. Easily removed to do free hand work
- Motor - 1/3HP motor provides ample power for cutting bowl and pen blanks
WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10"
$275.73
$339.15
Last update was on: April 27, 2024 3:37 am
- 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
- Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
- Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
- Operates at two speeds of either 1520 or 2620 FPM.Dimensions of the stand: 13 3/4 L x 15 3/4 W x 25 1/4H (Inches)
- Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)
FREUD D1060X ATB Fine Finish Saw Blade
Freud 10" x 30T Industrial Thin Kerf Glue Line Ripping Blade (LM75R010)
$53.52
$73.86
Last update was on: April 27, 2024 3:37 am
- 10" Blade Diameter, 30 Teeth, TCG Grind, 5/8" Arbor, .091" Kerf, 12° Hook Angle
- Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
- Thin Kerf requires less power and allows for faster feed rate
- Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Freud 10" x 50T Thin Kerf Combination Blade (LU83R010)
Last update was on: April 27, 2024 3:37 am
- 10" Blade Diameter, 50 Teeth, COMB Grind, 5/8" Arbor, .091" Kerf, 10° Hook Angle
- Premium TiCo HI-Density Carbide Combination Blend for Maximum Performance
- Thin Kerf requires less power and allows for faster feed rate
- Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
WEN 4208 8 in. 5-Speed Drill Press
$81.18
$116.09
Last update was on: April 27, 2024 3:37 am
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
Hitachi C10FCG 15-Amp 10" Single Bevel Compound Miter Saw
$154.95
$229.33
Last update was on: April 27, 2024 3:37 am
- 0-52 degree miter angle range to the right & left for increased flexibility , Motor Horsepower - 2.57 hp
- 0-45 degree bevel range to the left to provide clean and accurate bevel cuts.Thumb actuated positive stops for quick miter adjustments
- 24.2 lbs to facilitate maneuverability and easier transport.Dust collector attachment included to minimize airborne particle
- 15 Amp motor delivers high power for the toughest cutting jobs.Large table for better material support with vice clamping system to secure work piece
Craftsman 10" Single Bevel Sliding Compound Miter Saw (21237)
SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
$346.66
$422.93
Last update was on: April 27, 2024 3:37 am
- First ever brass-geared Worm Drive table saw for maximum power and torque.
- 15 Amp solid construction Dual-Field motor for increased cutting speed and extended motor life
- 25 in. rip capacity and 3-1/2 in. depth of cut for ripping a wide variety of materials
- Self-aligning rip fence with on-tool storage for a true cut
- Portable and compact while staying lightweight at only 49 lbs.Table Material:Aluminum
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
$30.64
$38.91
Last update was on: April 27, 2024 3:37 am
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade
Last update was on: April 27, 2024 3:37 am
- Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick
- For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 5,500
- Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood.
- Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required.
SKIL 3601-02 Flooring Saw with 36T Contractor Blade
Kreg KMS7102 Table Saw Precision Miter Gauge System
Last update was on: April 27, 2024 3:37 am
- Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
- Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
- Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
Bosch GTA500 Folding Stand for 10-Inch Portable Jobsite Table Saw (GTS1031)
$81.35
$116.33
Last update was on: April 27, 2024 3:37 am
- Exclusive compatibility with GTS1031
- Attach and detach saw stand in seconds, without tools
- Folds flat for convenient for transport and storage
- Solid and durable – all-steel design with solid center of gravity for maximum performance
- Light weight – weighs only 14 pounds and can be easily carried one-handed
Hopkins 90164 2x4basics Work Bench and Shelving Storage System
Last update was on: April 27, 2024 3:37 am
- Lumber not included
- Includes 4 workbench legs, 6 shelf links
- Brackets made of heavy gauge structural resin supports up to 1000 lbs (400 kg) per shelf
- Customizable workbench of any length up to 8 ft, width up to 4 ft, bench sitting at 36 inches tall
- Only straight 90 degree cuts, no miter or angle cuts necessary
Shop Fox D2275 Tool Stand
ZEROPLAY Miter Bars by MICROJIG (Double Pack)
$33.80
$46.64
Last update was on: April 27, 2024 3:37 am
- Hassle-free miter bars using One-Touch Calibration
- No slop, side-to-side play or seasonal warping
- Top-down installation for easy and fast mounting to jigs, fixtures and sleds
- Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks
- Includes 2 ZEROPLAY miter bars, 2 ZEROPLAY miter stops and cross cut jig plans
- For T-Track Miter Slots Only
Adjustable Mobile Base HTC2000 for Power Tools by HTC
$57.56
$67.92
Last update was on: April 27, 2024 3:37 am
- Rugged 500-lb capacity means your heaviest machines will glide out of your way
- Fully adjustable to fit almost any machine / tool. Expands from 12x12 inches to 36 x 36, and can go up to 20 x 52 - all in one-inch increments
- Foot lever lock-unlock for ease of use, and the four wheels are durable hard rubber, which adds to the stability
- Very low profile - increases machine height by less than 1 inch, meaning it won't interfere with operation
Makita 5007MG Magnesium 7-1/4-Inch Circular Saw
$149.00
$213.07
Last update was on: April 27, 2024 3:37 am
- Magnesium components create a lightweight saw (10.6 lbs.) that is well balanced and jobsite tough.
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability
- Two built-in L.E.D. lights illuminate the line of cut for increased accuracy
- Large cutting capacity (2-1/2" at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°and 45°
- 1 year warranty
Amana Tool Mamba Series MA10024 Thin Kerf Ripping 10-Inch x 24 Tooth x ATB+F Grind 5/8-Inch Bore Saw Blade
$33.80
$42.93
Last update was on: April 27, 2024 3:37 am
- Ripping: Rips Wood
- 10-Inch x 24 Teeth, ATB+F Grind, 5/8-Inch Bore, 20-Degree Hook Angle
- Features thin-kerf design requiring less horsepower and hollow ground teeth that provide sharper cuts and extended blade life
- Specially Designed for Contractors
- Covered by Amana Tool's Lifetime Guarantee against saw blade material and workmanship defects, subject to guidelines