10BestProductReview We spent many hours on research to finding carbide inserts for dewalt planer, reading product features, product specifications for this guide. For those of you who wish to the best carbide inserts for dewalt planer, you should not miss this article. carbide inserts for dewalt planer coming in a variety of types but also different price range. The following is the top 10 carbide inserts for dewalt planer by our suggestions
850 reviews analysed
ELEPHAS – Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt planer DW735 Without Removing Inserts
- This cutterhead’s cutting diameter is 2mm less than the original cutterhead, which allows you to install it on the machine without removing inserts. The two bearings 6204+6202 are already installed on the cutterhead.
- Reduced noise and tear-out, produce much smoother finish on difficult woods.
- The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead.
- The indexable inserts allows you to rotate it if one knife edge is dull or nicked.
- Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches
The cutting diameter of this head is 2mm slightly smaller than the original size, which allows you to install onto the machine without removing inserts.
The tool kit includes: 5 spare inserts/ 10 spare screws/ two T wrenches.
Also, our patented Double Layer Insert and screw make it much easier to mount the knives on the cutter head, it’s a user-friendly design; and it also eliminates insert breakage.
Byrd Tool Shelix cutterhead for Dewalt planer DW735
- Cutterhead diameter is 0.088″ (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
- C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
- Spiraled to break up chips for dust collection, shear to give clean cutting action
- True helical cut (slices the wood) which greatly reduces noise and tearout
- Pocket for cutters makes replacing them easy and creates perfect alignment
The overall cutterhead diameter is 0.088″ (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts. The ORIGINAL SHEar & heLIX and spiral cutter non-grind design. Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.
YUFUTOL 10pcs 16mm Round Carbide Inserts Cutters Knifes Indexable Replacement Fits For Popular DIY Woodworking Lathe Wood Turning Finisher Hollower Tools With 10pcs M5x9mm screws
- The perfect grade of carbide provides the best combination of the sharpness and durability.Ideal for giving you a smooth finish on curved, concave surfaces , hollowing jobs and for general turning applications
- Designed for Easy Start Finishers/Full Pro hollowers,The right geometry or 30*cutting angle is ground to provide an edge that cuts cleanly and safely.
- Per pack of 10 pcs round carbide insert cutters, Size DIA 12mm X THICK2.5mm-30*,comes with 10pcs M4X9mm Flat head screws for your convenience.
- Cutters have the perfect grade of carbide to achieve the best combination of sharpness and edge durability.
- Designed with a 30° cutting angle ground to a razor finish for making smooth cuts in any hard wood
Product description:
This solid carbide cutter was sharpened on a diamond wheel and can be rotated to give you a fresh edge in a few seconds . Use it with the Round Carbide Turning Tool to get smooth finishes on concave surfaces and hollowing jobs .Many wood turners purchase these for replacements on popular carbide woodturning tools or for their own woodturning tool designs.
More Features:
-Ideal for giving you a smooth finish on curved, concave surfaces , hollowing jobs and for general turning applications
-Cutter rotates give you numerous fresh edges without sharpening
-Compared with steel the solid carbide stays sharp for longer
Specifications:
Designed for Easy Start Finishers/Full Pro hollowers and other popular wood lathe tool,Diameter approximately .50″ (12mm). Thickness .09″ (2.5mm) with a .171″ (4.40mm) dia. countersunk mounting hole at std. 82 degrees.
Mounted with a mounting screw, 4-40 SAE thread size, 3/8″ long flat head cap screw. More choices in our Amazon store:
Round :12mm dia -2.5mm thick-30*
Round: 9mm dia-2.0mm thick-30*
Round: 11mm dia-4.0mm thick-30*
Round: 15mm dia-2.5mm thick-30*
Round :16mm dia-3.0mm thick-30*
Diamond Shape cutter inserts: 28mm X 10mm-30*
B0829MDLY6
- Made of solid tungsten carbide, providing you a better experience and durable use
- 14mm square straight carbide insert with 10pcs M6*10mm Screws,Designed for numerous spiral/helical planer cutter head system,wood lathe Tools
- Easy to replace your jointers and planers, excellent accessory for wood turning work.
- 4-Cutting edge(14mm lengthX14mm width X2.0mm Thick-30* Cutting angle, and all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
The 14mm Straight Square solid Carbide Insert Knives are offered in pack of 10 standard sizes.They are sharpened to a razor edge on 4 sides It can be rotated to a new razor edge as one side becomes dull. Apply for general purpose wood, chipboard, plywood,MDF/HDF,The high performance reversible and indexable replacement square carbide inserts have 4 cutting edges. square corner.14 mm length X 14mm width, 2.0mm thickness. And 1 standard hole for locating into your cutter heads. The 4 sides are of the same sharpness , its just like 4 sets of knives for your machine. Their solid carbide micro grain tips give superior tool life in a wide variety of materials for all general spiral planer head in hard woods and soft woods, the insert can be used for the heads of your jointer and planer. It will definitely be of great help and your excellent partner for your wood working &turning. These carbide inserts are fully boxed in the standard plastic boxes for safe storage and transportation.
Dimentions: 14mmX14mmX2.0mm
Type: Straight Face, 4-edge, Square
Material: Solid Tungsten carbide
Hardness: 94.5HRA
Other standard size carbide insert avaliable on our amazon shop：
carbide inserts for wood working & turning
Radius face round edge series:
4” face radius round edge 15x15x2.5-R150
6″ face radius round edge 15x15x2.5-R100
2″face radius round edge 15x15x2.5-R50
Straight insert-countersink hole series:
14x14x2.0-30* 14.3×14.3×2.5-30* 14.6×14.6×2.5-30* 15x15x2.5-30* 4 edges
carbide inserts for wood turning:
Round :12mm dia -2.5mm thick-30*
Round :16mm dia-3.0mm thick-30*
Diamond: 28mm X 10mm-30*
Byrd Tool woodworking Shelix OEM Size cutterhead for Dewalt planer DW735
- This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
- Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
- Helical insert knife configuration breaks up chips, making dust collection easier.
- Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade
- comes with 5 replacement inserts.
- Made in the USA!
The overall cutterhead diameter is the same as the original OEM head. The ORIGINAL SHEar & heLIX and spiral cutter non-grind design. Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.
OSCARBIDE 15mm Square Carbide Inserts Cutters (15 x15 x2.5-R150) Replacement Insert Cutter 6”Radius Face for Woodworking Spiral/Helical Planer Cutter Head Wood Turning Tool 10pcs
- Carbide Cutter size: 15mmx15mmx2.5mm,4-indexable cutting edge,30* Cutting bevel, With 150mm Radius and 4 Radius Corners,polished to a mirror finish for smoother cutting and longer tool life
- Made of Tungstern Carbide, more endurable ,for long time using.
- This replacement carbide inserts are specifically designed to fit Titan Spiral Shear Heads for surfacing/planing cutterhead,groovers,helical head etc
- Each individual cutter insert is sharpened on four sides, all of the 4 edges can be rotated to expose a new cutting edge when dull or chipped.
- Carbide inserts were sold in boxes of 10,packed with a plastic container for safe and easy storage.
4" Radius 15mmx15mmx2.5mm Carbide Inserts Cutters Replacement For Byrd Shelix Cutterheads For Dewalt DW735 DW735X – 10 Pack
- Size:15mmx15mmx2.5mm-R100, 4″ radius edge , 4 indexable cutting edge, polished to a mirror finish for smoother cutting work
- These inserts are 15mm x 15mm and feature 4 indexible radius edges, Cutters Made of solid tungsten carbide,own longer use life,sharp and durable
- Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side
- Fits for Spiral/Helical Planer Cutter Heads ,Rougher Wood Turning Tools
- 10 pieces per box,packed with a plastic container for safe and easy storage
Material: Tungsten Carbide Shape: square with 4-Raiuds edges Cutting Edge: R-100mm(4″) radius edge with 4 sharp-corners Length: 15mm width:15mm Thickness:2.5mm Bevel: 30 degree Hole: one countersink hole Fits: popular wood working planer/helical Thicknessers,Knives marked with Quantity: 10pcs/box Applications: woodturning,woodworking More Features: 1. Ideal for giving you a smooth finish on using to general purpose wood, chipboard, plywood, MDF/HDF 2. Cutter rotates give you numerous fresh edges without sharpening 3. Compared with steel the solid carbide stays sharp for longer
YUFUTOL 12mm Square Straight Carbide Cutter Inserts 4 Edges(12mm lengthX12mm widthX1.5mm) Straight-Hole,Pack of 10, Designed for Spiral/Helical Planer Cutter Head
- Made of solid tungsten carbide, providing you a better experience and durable use
- Designed for numerous spiral/helical planer cutter head system, DIY wood turning tools
- Easy to replace your jointers and planers, excellent accessory for wood surfacing planing &turning work.
- Four usable sides, and all are of the same sharpness, increase 4 times working life. widely used for plywood, particle board, hard wood, soft wood, HDF, MDF.
- 12mm x 12mm sq. x 1.5mm thick with a 4.10mm diameter hole for mounting and a 35 degree cutting bevel. .472” x .472” x .059” thick with a .161” dia. mounting hole.
Product description:
The woodworking Straight Square & straight Hole Solid Carbide Insert Knives are offered in pack of 10 standard sizes:12X12x1.5mm,with 4-cutting edges, They are sharpened to a razor edge on four sides It can be rotated to a new razor edge as one side becomes dull. Apply for general purpose wood, chipboard, plywood,MDF/HDF
Dimentions: 12mmX12mmX1.5mm
Type: Straight Face, 4-edge, Square
Material: Solid Tungsten carbide K05
Hardness: 94.5HRA
Hole type: Straight hole
Other standard size carbide insert avaliable on our amazon shop：
carbide inserts for wood working & turning
Radius face round edge series:
4” face radius round edge 15x15x2.5-R150
6″ face radius round edge 15x15x2.5-R100
2″face radius round edge 15x15x2.5-R50
Straight insert-countersink hole series:
14x14x2.0-30* 14.3×14.3×2.5-30* 14.6×14.6×2.5-30* 15x15x2.5-30* 4 edges
carbide inserts for wood turning:
Round :12mm dia -2.5mm thick-30*
Round :16mm dia-3.0mm thick-30*
Diamond: 28mm X 10mm-30*
We are the manufacturer of tungsten carbide products, all the carbide cutter are well inspected before sending to our customer,More different sizes carbide inserts are coming soon!
Easy way to find our shop:by searching YUFUTOL on Amazon.com, get more choices of wood working &turning carbide replacement cutter inserts in our amazon shop! Thanks for shopping with YUFUTOL.
YUFUTOL 2" Face Radius R-50mm Wood Working Carbide Cutter inserts(15X15X2.5-4 edge corner radius,Pack of 10 with 10pcs Screws, Fits Planer/Helical Cutter Head and Wood Turning Tools
- K05 solid carbide cutter inserts providing you a better experience and durable use to general purpose wood, chipboard, plywood, MDF/HDF.
- Fits both popular helical planer cutter head or woodturning chisels, mount with 10pcs M6-10mm Screws
- Easy to replace your jointers and planers, also excellent accessory for wood turning tools
- 4-edge square shape (15mmX15mm), with radius face -R50mm, round edges,all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
The woodworking radius face and round edge Solid Carbide Insert Knives are offered in pack of 10 standard sizes:15X15x2.5mm,with 4 cutting edges, 2” face radius and round edges,They are sharpened to a razor edge on four sides that have a slight curve with a 50mm radius. It can be rotated to a new razor edge as one side becomes dull. Both fits for helical planer cutter head to general purpose wood, chipboard, plywood,MDF/HDF, you can also used on woodturning chisels and other hand tools (For DIY Wood Turning hobbyist)
Dimentions: 15mmX15mmX2.5mm-R50
Type: Face Radius, Round Edge, 4-edge, Square
Material: Solid Tungsten carbide K05
Hardness: 94.5HRA
Other standard size carbide insert avaliable on our amazon shop：
carbide inserts for wood working & turning
Radius face round edge series:
4” face radius round edge 15x15x2.5-R100
2″face radius round edge 15x15x2.5-R150
Square Insert Knives – Straight Hole series:
12x12x1.5-35*-4 edge
Straight insert-countersink hole series:
14x14x2.0-30* 14.3×14.3×2.5-30* 14.6×14.6×2.5-30* 15x15x2.5-30* 4 edges
carbide inserts for wood turning:
Round :12mm dia -2.5mm thick-30*
Round :16mm dia-3.0mm thick-30*
Diamond: 28mm X 10mm-30*
We are the manufacturer of tungsten carbide products, all the carbide cutter are well inspected before sending to our customer,More different sizes carbide inserts are coming soon!
Easy way to find our shop:by searching YUFUTOL on Amazon.com, get more choices of wood working &turning carbide replacement cutter inserts in our amazon shop! Thanks for shopping with YUFUTOL.
YUFUTOL 15mm Square Straight Carbide Cutter Insert(15mm length X15mm widthX2.5mm thickness),Pack of 10, Designed for Spiral/Helical Planer Cutter Head Wood Lathe Tool
- Made of solid tungsten carbide, providing you a better experience and durable use
- 15mm straight square face, No face radius, it’s easy to mix up. Designed for numerous spiral/helical planer cutter head system,will fits M6X8 Flat screw
- Easy to replace your jointers and planers, excellent accessory for wood working and lathe turning work.
- Four usable edge(15mm lengthX15mm width X2.5mm Thick-30* Cutting angle, and all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
Please check this important notice before purchasing:
There are many different types of 15mm carbide inserts, they are easy to mix up
This15mm square straight carbide insert( 15mm length x15mmwidth x2.5mm thickness), with no face radius and corner radius, this is very important part and our customers are easy to buy the wrong items, we have received many feedback about this wrong selection of carbide inserts. please check the shape of carbide inserts:is there any radius on the corner or the face, this carbide inserts is square corner, so be careful don’t choose the wrong item.
The 15mm straight corner square reversible and indexable replacement carbide inserts have 4 cutting edges. And 1 standard hole for locating into your cutter heads. The 4 sides are of the same sharpness , its just like 4 sets of knives for your machine. Their solid carbide micro grain tips give superior tool life in a wide variety of materials for all general spiral planer head in hard woods and soft woods, the insert can be used for the heads of your jointer and planer.
Dimentions: 15mmX15mmX2.5mm
Type: Straight Face, 4-edge, Square
Material: Solid Tungsten carbide
Hardness: 94.5HRA
Other standard size carbide insert avaliable on our amazon shop：
carbide inserts for wood working & turning
Radius face round edge series:
4” face radius round edge 15x15x2.5-R150
6″ face radius round edge 15x15x2.5-R100
2″face radius round edge 15x15x2.5-R50
Straight insert-countersink hole series:
14x14x2.0-30* 14.3×14.3×2.5-30* 14.6×14.6×2.5-30* 15x15x2.5-30* 4 edges
carbide inserts for wood turning:
Round :12mm dia -2.5mm thick-30*
Round :16mm dia-3.0mm thick-30*
Diamond: 28mm X 10mm-30*
Conclusion
By our suggestions above, we hope that you can found Carbide Inserts For Dewalt Planer for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Carbide Inserts For Dewalt Planer, eg:
- What are Top 10 Carbide Inserts For Dewalt Planer for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Carbide Inserts For Dewalt Planer to buy?
- What are Top Rated Carbide Inserts For Dewalt Planer to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Carbide Inserts For Dewalt Planer?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Carbide Inserts For Dewalt Planer.
- Before deciding to buy any Carbide Inserts For Dewalt Planer, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Carbide Inserts For Dewalt Planer and What you should consider when buying the Carbide Inserts For Dewalt Planer and Where to Buy or Purchase the Carbide Inserts For Dewalt Planer. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Carbide Inserts For Dewalt Planer of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Carbide Inserts For Dewalt Planer.
