Best angle grinder for wood carving
Deal Score+1
Deal Score+1
Best results for angle grinder for wood carving
TOVIA 3 Teeth Wood Cutting Shaping Disc for Angle Grinder,Multipurpose Carving Wheel,Stump Log Grinder Attachment with 7/8" Arbor
$16.60
$24.40
Last update was on: May 17, 2024 8:36 am
- Three tungsten carbide teeth ensure safe work with the blade by creating the acceptable value of radial resistance at high rotation rate
- Special anti-kickback design. Designed especially for working at high RPM rates (up to 12 200 RPM).
- No overheating of the blade even during continuous work
- Smooth grooving with a clean cut is ensured by the unique shape of the teeth
- Multi-purpose cutting for wood board,MDF,chipboard,laminate flooring,plasterboard,plywood.Remove material quickly and fast.Wood carvers CHOICE.
Original GRAFF Speedcutter Woodworking Blade for Angle Grinder, Disc for Wood Carving, Cutting, Shaping with 3 Teeth 7/8” Arbor (4.5 Inch (115mm)) from Manufacturer
$17.00
$24.82
Last update was on: May 17, 2024 8:36 am
- Angle grinder woodworking blade is an ideal solution for cutting, carving wood, aerated concrete, plasterboard, laminate and plastic by using your power tool at high rotation rates. Angle grinder disc for wood has a special anti kickback design
- Three tungsten carbide tooth design ensures safe work with the blade because it creates reasonable radial resistance value at high rotation speed rates. Please note that using standard circular saw blades with an angle grinder is NOT safe
Grinder Wood Carving Chain Disc Angle Grinder Disc IRmm Chain Saw Plate 22 tooth, 5/8" center hole For Shaping Cutting & Engraving of Wood, Plastic, Ice & Hard Rubber (4 inch)
$13.99
$17.07
Last update was on: May 17, 2024 8:36 am
- Arbor:5/8inch (16mm) ,14000rpm Max
- Fits most 4- and 4-1/2-inch angle grinders.
- Grinder Disc Chainsaw Cuts in any direction while making smooth cuts,takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber.
- Regardless of grain or knots the blade cuts through the material with ease,especially useful for cutting floor and wall openings.
- 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.Chains can be either be sharpened using a chain saw file or replaced as needed.
POLIFE Circular Saw Blade Cutter Tool 2 PCS, Cordless Saw Blades for 100/115 Angle Grinder, Disc Plunge Wood Cut Wheel, Chain 14 Teeth Cutting Set Chop Saws, Perfect for Wood Plastic Ice R (2 PCS)
$19.99
$24.39
Last update was on: May 17, 2024 8:36 am
- ۞۞ Wide Use ━> Our 14 teeth chain discs are versatile saw blades which will cut in any direction. Great for curved work, like the inside of bowls, cutting discs, resin metal cutting wheels for plywood, melamine, wood, stone, metal, plastic cutting and fast waste removal.
- ۞۞ Durable Steel Materials ━> Made of durable steel material, 14 tooth chain design provides a smooth surface. Balanced craftsmanship and high hardness allows these grinder disc chainsaws can some heavy duty use, such as the hard woods, ice, bonsai trees, rubber or any other soft non-ferrous materials, don’t worry it can withstand the test of time!
4 Inch Grinder Disc and Chain 22 Tooth Fine Cut Chain Set For 100 115 Angle Grinder 5/8 Inch Center Hole
$12.50
$16.88
Last update was on: May 17, 2024 8:36 am
- Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed and maneuverability.
- The chain saw blade is held in place between two steel plates which provides a secure grip for carving. Regardless of grain or knots the blade cuts through the material with ease to the user.
- Our 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.
Wood Carving Disc,IRmm 4 Inch Angle Grinder Chain Disc Double Saw Teeth Anti-Kickback Woodcarving Saw Blade,22 Teeth, 5/8" Arbor (4 in)
$13.99
$18.19
Last update was on: May 17, 2024 8:36 am
- 4" Diameter
- Maximum running RPM is 14,000 RPM
- Fits most of the 4 or 4-1/2 Inch angle grinders.Cuts in any direction
- Cuts everything from hardwood,plastics and other soft materials.Great for curved work,cutting sculpting, gauging and channeling
- Warning: To prevent serious injury,amputations,and DEATH,read and follow all power tool instructions and all instructions included with this item
- We Stand by and Believe in Our Products.If you are not 100% satisfied,please contact the SELLER.We will make it a great shopping experience
Grinder Disc Chain Plate,KOBWA 4/4.5 Inch Grinding Wheel Disc and 22 Tooth Fine Cut Carving Chainsaw Blade Set For 100/115 mm Angle Grinder,5/8 Inch Grinder Center Hole,Woodwork Circular Saw Blades
$12.98
$16.35
Last update was on: May 17, 2024 8:36 am
- ????[[Material] Steel, 4/4.5 Inch Diameter Chain 22 Tooth Fine Cut Carving, Circular Saw Blades provides a smooth "
- finished"
- surface which is great for minimal sanding afterwards.Steel /Chains can be either be sharpened using a chain saw file or replaced as need be.
- ????[Function] Grinder disc for wood carving,Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed when works,maximum speed up to 25000rpm /Great for curved work, like the inside of bowls, for fast waste removal.
Kutzall Extreme Shaping Disc – Coarse, Tungsten Carbide Coating: 4-1/2" (114.3mm) Diameter x 7/8" (22.2mm) Bore – SD412X90
$60.00
$66.00
Last update was on: May 17, 2024 8:36 am
- Coarse coating provides rapid material removal, saving you time and effort.
- Tungsten Carbide teeth give you outstanding wear-life.
- Comfortable, Effortless Operation - Allowing you to easily and quickly remove a variety of materials.
- Very resistant to loading.
- Should only be used on non-metallic materials. Made in USA
Angle Grinder Disc 22 Tooth Chain Saw Carving Blade Plate 4" for Wood Cutting Chainsaw Wheels Cutter 100/115mm Circular Woodworking Engraving Tool
$9.88
$13.54
Last update was on: May 17, 2024 8:36 am
- ▲ Made of premium steel materials, more durable to use.All blades are twice as large as conventional blades.
- ▲ Great for curved work, like the inside of bowls, cutting discs, resin metal cutting wheels for plywood, melamine, wood, stone, metal, plastic cutting and fast waste removal.
- ▲ Fits For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.
- ▲ Provides a secure grip for carving. Regardless of grain or knots the blade cuts through the material with ease to the user.
KwikTool USA BBC450 Bad Blade Carver 4-1/2" 6 Tooth With 1" Arbor And 7/8", 5/8", And 20mm Reduction Rings
$17.43
$21.61
Last update was on: May 17, 2024 8:36 am
- "Bad Blade Carver¿" 4.5" 6 tooth with 1" arbor with 5/8" reducer
- New Patented blade concept comes from Europe where they have been using these blades in angle grinders for years for working with wood .
- Ingenious, with specially designed tooth layout, set and reinforcement which give our tungsten carbide blades their awesome cutting ability with NO Kick-Back
- Rips and cuts and carves all types of woods, laminates, plastics, fiberglass and composites all with NO Kick-back
Gunpla 3 Pieces 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor
$17.45
$26.00
Last update was on: May 17, 2024 8:36 am
- PREMIUM QUALITY: Gunpla Alloy Steel TCT Circular Wood Saw Blade is made of construction-grade tungsten carbide. Fully Polished and Chrome Plated Surface provides a long-lasting usage life.
- EASY TO OPERATE:The circular saw blade is 4.5 inch (115mm), has 40 Teeth. Thin kerf for fast and smooth cutting action and the arbor size is 7/8”. Thin kerf and anti-stick rim for smooth, accurate cuts Computer-balanced plate reduces vibration.
Versatile Angle Grinder Saw Blade Speedwood 125 (5") Leman. Wood carving disc.
$19.99
$25.19
Last update was on: May 17, 2024 8:36 am
- Three tooth tungsten carbide ensures safe drive operation, creating an optimal allowable radial impedance at high speeds.
- Special design that prevents rebound. It provides freedom of the processing of natural materials.
- Even in continuous operation the saw blade does not heat. Disc body made of high-carbon steel with a thickness of 2.4 mm.
- The shape of the teeth ensures smooth sample timber and a smooth and clean cut.
Kutzall Extreme Shaping Dish – Very Coarse, Tungsten Carbide Coating: 4-1/2" (114.3mm) Diameter x 7/8" (22.2mm) Bore – DW412X120
$60.00
$66.60
Last update was on: May 17, 2024 8:36 am
- Very Coarse coating provides rapid material removal, saving you time and effort.
- Tungsten Carbide teeth give you outstanding wear-life.
- Comfortable, Effortless Operation - Allowing you to easily and quickly remove a variety of materials.
- Very resistant to loading.
- Should only be used on non-metallic materials. Made in USA