10BestProductReview 
Best results for screw and drill size chart
General Tools 24 Hobby Drill Gage
$7.99
$8.79
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Fraction Drill Gauge
- This product is highly durable
- This product is manufactured in China.
- General Tools Hobby Drill Gage is extremely helpful when working with older, unmarked drill bits, as well as with bits that are too small to fit diameter markings
- The Hobby Drill Gage is a useful guide for identifying drill bit sizes and measures bits from 1/16 inch to 1/2 inch x 64ths
- Etched graduations are filled in black to give high contrast and will not wear off this drill gauge
Screw Chek’r SAE/Inch Screw Checker (No. 4 to 1/2) 1/8 Inch Heavy Gauge Steel Screw Checker, Made In USA
$16.54
$24.48
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do it yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for sizes ranging from No. 4 through 1/2 inch in the UNC and UNF pitches. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
Screw Chek’r SAE/ Inch Screw Thread Size Gauge (No. 1 to 5/16) 1/8 Inch Heavy Gauge Steel Screw Checker, Made in USA
$15.05
$17.61
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do it yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for sizes ranging from No. 1 through 5/16 inch in NC, NF, and NS pitches. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
Screw Thread Gauge | Metric and SAE | Recommends Drill Bit & Tap Size (BCP675)
$8.95
$11.99
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Quickly and accurately determine the screws size
- Recommends the drill bit or tap size needed for the screw
- Standard & Metric
- Constructed of thick hard plastic for lasting durability
- Smooth easy to clean surface that resists oil and grease
Nut and Bolt Gauge, Metric, UNC, UNF, with Thread Pitch on Back(5 Colors to Choose from in Listing) (Blue)
Marine Bolt Supply Nut, Bolt & Screw Gauge Standard & Metric Coarse & Fine Diameter, Length & Thread Pitch (Red)
Engineering Slide Chart – Screw Data Selector
$29.99
$34.79
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- The Ultimate Engineering Screw Chart - NEW VERSION
- Includes technical information from many of the quick references that are commonly found in the work areas of designers, engineers, and machinists.
- All of this information is compiled for both English (Imperial) and Metric systems in a single screw chart. MADE IN THE USA.
- A “MUST HAVE” for Engineers, Designers, Drafters, and Machinists
Stainlesstown Nut Bolt Thread Gauge (Blue)
$8.95
$10.20
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Measures diameter, thread pitch & length of nuts, bolts & screws
- Measures fractional bolts from size #4 to 1" up to 7" long
- Measures metric bolts & screws from size 3mm to 22mm
- Made of very durable 1/4" thick hard plastic
- 1/4" thick x 8-3/4" Long x 3-3/8 Wide
Irwin 12092 1/16-to-1/2-Inch 29-Hole Steel Drill Bit Gauge
Boltsize-It Gauge, Blue
$9.41
$12.52
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Quickly and easily size bolts, screws, nuts and twist drills
- Features ruler marked with inches and millimeters
- Gauge metric hex nuts and washers by holding under metric holes
- Resists water, alcohol, oil and grease
- Made of hard plastic
Metric Screw Checker (2mm to 7mm) – Made in USA
$14.95
$21.38
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do-it-yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for metric screws from 2mm to 7mm. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
Woodstock D4141 Drill-Gauge Set, 3-Piece
Nut & Bolt Thread Checker (Inch & Metric)
$27.30
$31.40
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Each size has a nut and bolt checker on the same gauge. 26 male/female gauges - 14 inch & 12 metric.
- Thread sizes are permanently stamped onto each gauge (inch in red, metric in white)
- Inch gauges are clear zinc plated, metric gauges are black oxide.
- The individual gauges rotate freely on the wire cable for fast thread verification
- Wire cable with loop for convenient hanging
Cal Hawk Drill Bit, Bolt and Wire Gauge
$7.84
$10.66
Amazon.com
Last update was on: September 13, 2024 6:16 pm
- Quickly and conveniently identifies drill bit diameter
- Heavy gauge steel construction is machined and ground to close tolerances
- 29-hole sizes remain constant,providing precision accuracy
- Hole sizes of 1/16" to 1/2" by 64ths
- Permanently painted and etched on each side
